Crystal Clear UV Resin Kit with Lamp & 2 Molds & Pearl Pigment Powder Set for Epoxy Resin Dye for DIY, Resin Jewelry Making, Pendants Earrings Crafts Gifts of Resin, with Tweezer

Package: 8x UV resin, 30ml/pc 1x Curved pointed tweezer 1x Mini UV lamp with USB cable 6x Pearl pigment powder, green blue magenta golden silver 1x Mold for pendants with 12 shapes 1x Mold of oceanic patterns Instructions for UV resin: -Directly pour the resin in the mold or the bezel. -Add the pigment, glitter, dried flowers or anything you want in it using a toothpick or tweezers, and cure the resin with UV light. -Gradually add the amount of the pigment to adjust the color instead of pouring too much pigment at a time. How to use the pigment powder: First technique: We will need a small soft paint brush or a cotton swab. Dip the dry brush into the powder to pick up a small amount of the powder and simply brush right into the mold cavity. You should brush on enough to cover the cavity on all sides but not so much that you have a lot of loose powder. Loose powder that’s not in contact with the mold will more likely just end up floating to the top (back) of the piece. And then we fill the mold with the resin and wait for it to get cured. Second technique: We will need a mixing cup and a stir stick. Directly mix the powder into the resin before we fill the mold with it. Diffrence between these two ways? The first way allows the resin piece to be translucent while adding colour and a bit of sparkle. It also allows the addition of colour in an exact location. Resin pieces made in the second way are usually completely opaque and have a metallic marbled look. Attention: -Avoid contact with eyes, skin and clothing. -If you accidentally splash into your eyes, rinse immediately with plenty of water. -Keep out of reach of children. -Store the product in a cool, dry place, protected from light. -If you want to sand the resin piece, make sure to protect your eyes from the grit.

• NEW TYPE UV RESIN - Better transparency, lower viscosity, and most importantly, much faster curing - can be cured hard under 6W mini UV lamp in only 2 minutes (1 minute for both sides). Can also get cured under direct sunlight.
• STABLE QUALITY - 100% crystal clear UV resin with zero yellowing. Hard glassy finish, uniform gloss, minimum shrinkage, less bubbles, less odor.
• PIGMENT POWDER - Can be used any time a metallic or pearlescent effect is desired, adding colour and sparkle to your resin project. It can be either brushed first into the mold before you pour the resin in it or mixed with the resin in advance and let it get cured in the mold.
• GREAT QUALITY COLOURANT: With a touch of sparkle that exhibits extreme colour-fastness (meaning it won’t fade when left in a place with bright light) and stability (the colour remains true and does not change over time). Bottled packaged, easy to use and clean.
• NOTE: The bottles of the pigment powder are always filled fully at factory, but during transportation due to the very delicate powder quality and different density of it, they will have a different volume when you receive the product.